Product Introduction

Application : Mobile phone digital and 3C industry, metal, electroplating, ceramics, glass, building materials, car industry, jewelry, stationery, door locks ...

Features:

1. The glue is colorless and transparent, translucent up to 90-92%.

2. Environmental formula, non-oily harmful solvents, small odor, small environmental pollution, to meet the ROHS and other EU environmental standards.

3. Strong penetration, a variety of materials with strong adhesion, and resistance to split, salt spray excellent performance, up to 7 days or more.

4. Coating thickness of only 3-5 microns can show its effect. The maximum coating thickness should not exceed 30 microns.

5. The operation process is simple, since the dry, no baking or UV machine.

6, high temperature, with a certain fire retardant effect.

How to use : Substrate → anti-fingerprint spray →dry itself

Construction technology

1. Please filter the cloth with 600-800 mesh before use.

2. Use n-butanol to clean the gun, suction tubing, and all containers that come into contact with the paint. After cleaning the suction pipe in the suction pipe 600-800 purpose filter cloth, only into the paint bucket

3. Spray film thickness of 3-5 microns

4. Gun debugging, medium pressure, the smallest amount of oil, spray gun and product distance 15 - 20 cm, spray 4 guns can be.

5 cold leveling time 5 minutes

6 Dry conditions at room temperature 25 degrees (humidity 50-80 degrees) 2 hours table dry, 12-24 hours dry.

Packing : 18 kg,20 kg barrel

Performance introduction

Resistant to UV 300 hours without change.

Vibration grinding test 3 hours no change.

Wear test CS # 10 pass

Bend test 90 ° bend 4-6 times, 180 ° fold 2 times the coating does not crack or fall off.

Salt spray test for more than 800 hours.

Anti-fingerprint humidity more than 95%, finger press, no trace.

Chemical Resistance Test Alcohol wipes 500 times without exposure to substrate.

Boiled water 2h, 100 grid test, ≥ 4B.

Precautions

  1, need to use solvent (wash gun water) cleaning gun before use, oil hose and all the paint will come into contact with the container, and then ethanol (anhydrous alcohol) cleaning dry. After cleaning the suction pipe in the suction tube on the 500-600 mesh filter cloth, can be placed in the paint bucket.

2, before the operation, the work piece to be painted to do the surface of the clean and dry.

3, do not use and contact with oily paint and oily solvent, can not be used in the vicinity of the oil paint, in order to avoid the film surface shrinkage, eye ... and other defects caused by defects.

4, the best drying conditions for room temperature 25 degrees, humidity 50-80 degrees. Since the dry.

5, the above conditions need to be in accordance with the requirements of the process and operational experience to make appropriate amendments

Safety Code

This product is oily combustible materials, should be away from the fire, is strictly prohibited with the oil coating with spray 1 workshop,

Construction environment, should maintain air circulation.

Avoid contamination with skin or inhalation of excess spray. Such as sticky skin, apply soap and water rinse.

Such as splashing into the eyes, should immediately rinse with plenty of warm water, and timely medical treatment.